Bambu Lab P1S Combo vs Bambu Lab P2S Combo

The same printer and the same four spools, with a spool unit that can dry filament.

Affiliate disclosure: we may earn a commission from eligible partner links. Read our affiliate disclosure

The Bambu Lab P1S Combo: an enclosed black cube printer with a single toolhead inside, the original Bambu Lab AMS sitting on top holding four spools of filament, and a build plate marked 256 × 256 × 256 mm³.

Bambu Lab P1S Combo

The Bambu Lab P2S Combo: an enclosed grey cube printer with a touchscreen, the AMS 2 Pro labelled on top holding four spools of filament, and a build plate marked 256 × 256 × 256 mm.

Bambu Lab P2S Combo

The short version

The short version: Bambu Lab P1S Combo and Bambu Lab P2S Combo on the differences that decide between them
CriterionBambu Lab P1S ComboBambu Lab P2S Combo
Multi-colour systemAMS (Automatic Material System), 4 spoolsAMS 2 Pro, 4 spools, with a filament drying function
Max bed temperature100 °C110 °C
Dimensions389 × 389 × 458 mm392 × 406 × 478 mm
Weight12.95 kg printer; 21.60 kg gross with the AMS16.4 kg with the AMS 2 Pro; 21.33 kg gross
Price$549.00$749.00

Which one fits

Consider Bambu Lab P1S Combo if

  • You want ABS or ASA: Bambu lists both as ideal for this model
  • You want the enclosure included: it is plastic and glass with an activated carbon filter
  • You want the quietest-running option on cost: Bambu lists $549.00 with four spools included

Consider Bambu Lab P2S Combo if

  • You want filament dried before it is used: the AMS 2 Pro has a drying function
  • You want a bed that reaches 110 °C
  • You want hardened steel in the hotend and extruder as standard

Main tradeoffs

  • An AMS 2 Pro that dries filament and a 110 °C bed$749.00 and 16.4 kg
  • $549.00 for the same enclosed CoreXY body and four spoolsthe original AMS and a 100 °C bed

At a glance

At a glance: Bambu Lab P1S Combo and Bambu Lab P2S Combo side by side
CriterionBambu Lab P1S ComboBambu Lab P2S Combo
Best forA first multi-colour printer that will also run engineering materialsSomeone who prints in materials that need drying before they print well
Pricing$549.00$749.00
Key differentiatorAn enclosed chamber with ABS and ASA listed ideal, for $549.00An AMS 2 Pro that dries filament, and a 110 °C bed
Category3D Printers3D Printers

Key facts

Key facts: every published figure held for both Bambu Lab P1S Combo and Bambu Lab P2S Combo
FactBambu Lab P1S ComboBambu Lab P2S Combo
Price$549.00$749.00
Multi-colour architectureSingle nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every changeSingle nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every change
Independent toolheads11
Build volume256 × 256 × 256 mm256 × 256 × 256 mm
Multi-colour systemAMS (Automatic Material System), 4 spoolsAMS 2 Pro, 4 spools, with a filament drying function
Spools held44
EnclosureYes — enclosed in plastic and glassYes — plastic and glass outer frame over a plastic and steel chassis
Max nozzle temperature300 °C300 °C
Max bed temperature100 °C110 °C
Nozzle diameter0.4 mm included; 0.2, 0.6 and 0.8 mm available0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported
Materials listed idealPLA, PETG, TPU, PVA, PET, ABS, ASA—
Materials listed capablePA, PC—
Max toolhead speed500 mm/s (Bambu’s stated max speed of the tool head, not a throughput figure)—
Max toolhead acceleration20 m/s² (20,000 mm/s²)—
Motion systemCoreXYCoreXY
CameraChamber camera, 1280 × 720 at 0.5 fps, timelapse supported—
Filament runout detectionYes—
Air filtrationActivated carbon filterCarbon filter
Dimensions389 × 389 × 458 mm392 × 406 × 478 mm
Weight12.95 kg printer; 21.60 kg gross with the AMS16.4 kg with the AMS 2 Pro; 21.33 kg gross
Warranty2 years2 years
Heated chamber—No — Bambu states the chamber has no active heating and regulates through the enclosure
Connectivity—1,200 W at 220 V and 1,000 W at 110 V; 100-120 / 200-240 VAC

The same enclosed 256 mm cube, the same single nozzle, the same four spools. What changes is the spool unit and the bed. The P1S Combo ships the original AMS and a 100 °C bed for $549.00; the P2S Combo ships the AMS 2 Pro, which dries filament, and a 110 °C bed for $749.00, with hardened steel in the hotend and extruder and a built-in filament cutter. Neither has an actively heated chamber — Bambu says so for the P2S in as many words and publishes nothing for the P1S, which is why that row is absent here rather than guessed. $200 for drying, 10 °C and hardened steel.

Take the next step

Related comparisons