Snapmaker U1 vs Bambu Lab P2S Combo
Four toolheads or one, for exactly the same $749.
Affiliate disclosure: we may earn a commission from eligible partner links. Read our affiliate disclosure
The short version
| Criterion | Snapmaker U1 | Bambu Lab P2S Combo |
|---|---|---|
| Multi-colour architecture | Four independent toolheads — each colour or material stays loaded in its own head and the machine swaps the head, so nothing is purged between them | Single nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every change |
| Independent toolheads | 4, plus one spare hotend supplied | 1 |
| Build volume | 270 × 270 × 270 mm | 256 × 256 × 256 mm |
| Multi-colour system | Four independent toolheads with a 5-second toolchanger | AMS 2 Pro, 4 spools, with a filament drying function |
| Max bed temperature | 100 °C | 110 °C |
Which one fits
Consider Snapmaker U1 if
- You want the biggest bed here: Snapmaker states 270 × 270 × 270 mm
- You want the higher stated toolhead speed: Snapmaker states 500 mm/s
- You want a chamber camera as standard: it is a 2-megapixel built-in camera
Consider Bambu Lab P2S Combo if
- You want filament dried before it is used: the AMS 2 Pro has a drying function
- You want a bed that reaches 110 °C
- You want hardened steel in the hotend and extruder as standard
Main tradeoffs
- Four independent toolheads with nothing purged between them, and a 270 mm cubea 1-year warranty and a maker with one printer behind it
- A single nozzle on the best-selling printer line there is, with a 110 °C bed and a 2-year warrantypurged material on every colour change
At a glance
| Criterion | Snapmaker U1 | Bambu Lab P2S Combo |
|---|---|---|
| Best for | Multi-material prints where purge waste is the thing you mind most | Someone who prints in materials that need drying before they print well |
| Pricing | $749.00 | $749.00 |
| Key differentiator | Four independent toolheads and a 270 mm cube, for $749.00 | An AMS 2 Pro that dries filament, and a 110 °C bed |
| Category | 3D Printers | 3D Printers |
Key facts
| Fact | Snapmaker U1 | Bambu Lab P2S Combo |
|---|---|---|
| Price | $749.00 | $749.00 |
| Multi-colour architecture | Four independent toolheads — each colour or material stays loaded in its own head and the machine swaps the head, so nothing is purged between them | Single nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every change |
| Independent toolheads | 4, plus one spare hotend supplied | 1 |
| Build volume | 270 × 270 × 270 mm | 256 × 256 × 256 mm |
| Multi-colour system | Four independent toolheads with a 5-second toolchanger | AMS 2 Pro, 4 spools, with a filament drying function |
| Spools held | 4 | 4 |
| Max nozzle temperature | 300 °C | 300 °C |
| Max bed temperature | 100 °C | 110 °C |
| Nozzle diameter | 0.4 mm proprietary stainless hotends | 0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported |
| Materials listed ideal | PLA, PETG, TPU, PVA, PCTG | — |
| Max toolhead speed | 500 mm/s (Snapmaker’s stated maximum, not a throughput figure) | — |
| Max toolhead acceleration | 20,000 mm/s² | — |
| Bed levelling | Mesh bed levelling | — |
| Camera | 2-megapixel built-in chamber camera | — |
| Filament runout detection | Supported | — |
| Connectivity | Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n) and USB flash drive | 1,200 W at 220 V and 1,000 W at 110 V; 100-120 / 200-240 VAC |
| Dimensions | 584 × 499 × 730 mm | 392 × 406 × 478 mm |
| Weight | 18.2 kg | 16.4 kg with the AMS 2 Pro; 21.33 kg gross |
| Warranty | 1 year | 2 years |
| Enclosure | — | Yes — plastic and glass outer frame over a plastic and steel chassis |
| Heated chamber | — | No — Bambu states the chamber has no active heating and regulates through the enclosure |
| Motion system | — | CoreXY |
| Air filtration | — | Carbon filter |
Both list at $749.00 and both print in four colours, and that is where the similarity stops. The Snapmaker U1 has four independent toolheads: each colour stays loaded in its own head and the machine swaps the head, so nothing is purged between them. The Bambu P2S Combo has one nozzle and an AMS 2 Pro that feeds four spools into it in turn, purging at every change — and that AMS 2 Pro can dry filament, which no toolhead can. The U1 gives a 270 mm cube against 256 and a 2 MP chamber camera; the P2S gives a 110 °C bed against 100, a 2-year warranty against 1, and the longest track record in the category. The same money buys two different machines.

