Bambu Lab A1 Combo vs Bambu Lab P1S Combo

The box around it, and the materials Bambu will let you put in it.

Affiliate disclosure: we may earn a commission from eligible partner links. Read our affiliate disclosure

The Bambu Lab P1S Combo: an enclosed black cube printer with a single toolhead inside, the original Bambu Lab AMS sitting on top holding four spools of filament, and a build plate marked 256 × 256 × 256 mm³.

Bambu Lab P1S Combo

The short version

The short version: Bambu Lab A1 Combo and Bambu Lab P1S Combo on the differences that decide between them
CriterionBambu Lab A1 ComboBambu Lab P1S Combo
EnclosureNo — open frame with a moving bedYes — enclosed in plastic and glass
Materials listed idealPLA, PETG, TPU, PVAPLA, PETG, TPU, PVA, PET, ABS, ASA
Multi-colour systemAMS lite, 4 spools, mounted externallyAMS (Automatic Material System), 4 spools
Max toolhead acceleration10,000 mm/s²20 m/s² (20,000 mm/s²)
Price$399.00$549.00

Which one fits

Consider Bambu Lab A1 Combo if

  • You print PLA, PETG, TPU or PVA: Bambu lists all four as ideal
  • You want the lowest price into Bambu’s AMS system: $399.00 with the AMS lite
  • You want the sensor set: runout, tangle and filament odometry are all listed

Consider Bambu Lab P1S Combo if

  • You want ABS or ASA: Bambu lists both as ideal for this model
  • You want the enclosure included: it is plastic and glass with an activated carbon filter
  • You want the quietest-running option on cost: Bambu lists $549.00 with four spools included

Main tradeoffs

  • An enclosed chamber, a carbon filter, and ABS and ASA listed as ideal$549.00
  • $399.00 and the lighter machine to put on a deskABS, ASA, PC, PA and fibre-filled polymers all listed Not Recommended

At a glance

At a glance: Bambu Lab A1 Combo and Bambu Lab P1S Combo side by side
CriterionBambu Lab A1 ComboBambu Lab P1S Combo
Best forPLA and PETG in four colours, on a desk, for the least moneyA first multi-colour printer that will also run engineering materials
Pricing$399.00$549.00
Key differentiatorBambu’s four-spool system at $399.00, on an open frameAn enclosed chamber with ABS and ASA listed ideal, for $549.00
Category3D Printers3D Printers

Key facts

Key facts: every published figure held for both Bambu Lab A1 Combo and Bambu Lab P1S Combo
FactBambu Lab A1 ComboBambu Lab P1S Combo
Price$399.00$549.00
Multi-colour architectureSingle nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every changeSingle nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every change
Independent toolheads11
Build volume256 × 256 × 256 mm256 × 256 × 256 mm
Multi-colour systemAMS lite, 4 spools, mounted externallyAMS (Automatic Material System), 4 spools
Spools held44
EnclosureNo — open frame with a moving bedYes — enclosed in plastic and glass
Max nozzle temperature300 °C300 °C
Max bed temperature100 °C100 °C
Nozzle diameter0.4 mm included; 0.2, 0.6 and 0.8 mm available0.4 mm included; 0.2, 0.6 and 0.8 mm available
Materials listed idealPLA, PETG, TPU, PVAPLA, PETG, TPU, PVA, PET, ABS, ASA
Materials the maker advises againstABS, ASA, PC, PA, PET and carbon- or glass-fibre reinforced polymers—
Max toolhead speed500 mm/s (Bambu’s stated max speed of the tool head, not a throughput figure)500 mm/s (Bambu’s stated max speed of the tool head, not a throughput figure)
Max toolhead acceleration10,000 mm/s²20 m/s² (20,000 mm/s²)
Motion systemMoving bed (bed-slinger)CoreXY
CameraChamber camera up to 1080p, timelapse supportedChamber camera, 1280 × 720 at 0.5 fps, timelapse supported
Filament runout detectionYes, with filament tangle detection and filament odometryYes
Dimensions465 × 410 × 430 mm389 × 389 × 458 mm
Weight8.3 kg printer; 13.5 kg gross with the AMS lite12.95 kg printer; 21.60 kg gross with the AMS
Warranty2 years2 years
Materials listed capable—PA, PC
Air filtration—Activated carbon filter

The same company, the same 256 mm bed, the same four-spool idea, and opposite materials lists — because one of them is a box and the other is not. The A1 Combo is an open frame with a moving bed, and Bambu lists ABS, ASA, PC, PA, PET and every fibre-reinforced polymer as Not Recommended for it. The P1S Combo is enclosed in plastic and glass with an activated carbon filter, and Bambu lists ABS and ASA as ideal. $399.00 against $549.00: the difference is the enclosure, and the enclosure is the materials.

Take the next step

Related comparisons