ELEGOO Centauri 2 Combo vs Bambu Lab A1 Combo

Twenty dollars apart, and one moves the bed while the other moves only the head.

Affiliate disclosure: we may earn a commission from eligible partner links. Read our affiliate disclosure

The ELEGOO Centauri 2 Combo: an open-frame CoreXY printer with ELEGOO on the side and a touchscreen at the front, with the CANVAS unit mounted above four spools of filament that feed its single toolhead.

ELEGOO Centauri 2 Combo

The short version

The short version: ELEGOO Centauri 2 Combo and Bambu Lab A1 Combo on the differences that decide between them
CriterionELEGOO Centauri 2 ComboBambu Lab A1 Combo
Motion systemCoreXYMoving bed (bed-slinger)
Multi-colour systemCANVAS, 4 coloursAMS lite, 4 spools, mounted externally
Max nozzle temperature350 °C300 °C
Max bed temperature110 °C100 °C
Materials listed idealPLA, PETG, PLA-CF, TPUPLA, PETG, TPU, PVA
Price$379.00$399.00

Which one fits

Consider ELEGOO Centauri 2 Combo if

  • You want the lowest list price here: ELEGOO states $379.00
  • You want CoreXY motion rather than a moving bed
  • You want the highest stated extrusion temperature of the six: ELEGOO states 350 °C

Consider Bambu Lab A1 Combo if

  • You print PLA, PETG, TPU or PVA: Bambu lists all four as ideal
  • You want the lowest price into Bambu’s AMS system: $399.00 with the AMS lite
  • You want the sensor set: runout, tangle and filament odometry are all listed

Main tradeoffs

  • CoreXY motion, a 350 °C nozzle and a 110 °C bed for $379.00an enclosure and a camera that are both optional extras
  • $399.00 with a camera, runout, tangle and odometry sensors includeda moving bed and a 300 °C nozzle

At a glance

At a glance: ELEGOO Centauri 2 Combo and Bambu Lab A1 Combo side by side
CriterionELEGOO Centauri 2 ComboBambu Lab A1 Combo
Best forA first four-colour printer where price decides itPLA and PETG in four colours, on a desk, for the least money
Pricing$379.00$399.00
Key differentiatorA 350 °C nozzle and CoreXY motion for $379.00Bambu’s four-spool system at $399.00, on an open frame
Category3D Printers3D Printers

Key facts

Key facts: every published figure held for both ELEGOO Centauri 2 Combo and Bambu Lab A1 Combo
FactELEGOO Centauri 2 ComboBambu Lab A1 Combo
Price$379.00$399.00
Multi-colour architectureSingle nozzle — the CANVAS system switches four spools into one hotend, and ELEGOO states a purge is required at every colour or material changeSingle nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every change
Independent toolheads11
Build volume256 × 256 × 256 mm256 × 256 × 256 mm
Multi-colour systemCANVAS, 4 coloursAMS lite, 4 spools, mounted externally
Spools held44
EnclosureOptional add-on — ELEGOO lists the enclosure as an add-on for this modelNo — open frame with a moving bed
Max nozzle temperature350 °C300 °C
Max bed temperature110 °C100 °C
Nozzle diameter0.4 mm0.4 mm included; 0.2, 0.6 and 0.8 mm available
Materials listed idealPLA, PETG, PLA-CF, TPUPLA, PETG, TPU, PVA
Max toolhead speed500 mm/s maximum, with ELEGOO recommending 250 mm/s500 mm/s (Bambu’s stated max speed of the tool head, not a throughput figure)
Max toolhead acceleration20,000 mm/s²10,000 mm/s²
Motion systemCoreXYMoving bed (bed-slinger)
Bed levelling121-point auto-levelling—
CameraOptional add-on — ELEGOO lists the camera as an add-on for this modelChamber camera up to 1080p, timelapse supported
ConnectivityUSB and Wi-Fi—
Dimensions500 × 480 × 586 mm465 × 410 × 430 mm
Weight15.5 kg8.3 kg printer; 13.5 kg gross with the AMS lite
Warranty12 months2 years
Materials the maker advises against—ABS, ASA, PC, PA, PET and carbon- or glass-fibre reinforced polymers
Filament runout detection—Yes, with filament tangle detection and filament odometry

Twenty dollars apart, and the cheaper one has the hotter nozzle. The ELEGOO Centauri 2 Combo is CoreXY with a 350 °C hardened steel nozzle and a 110 °C bed for $379.00; the Bambu A1 Combo moves the bed, tops out at 300 °C and 100 °C, and costs $399.00. The A1 brings the sensor set — runout, tangle and filament odometry — and a 1080p camera as standard, where ELEGOO sells the camera and the enclosure as add-ons for this model. Both feed four spools into one nozzle and both purge at every change. Neither is enclosed out of the box.

Take the next step

Related comparisons