3D Printers

Bambu Lab A1 Combo

The open-frame A1 with the AMS lite: four spools into one nozzle on a moving bed. Bambu lists ABS, ASA, PC and PA as not recommended.

The Bambu Lab A1 Combo: an open-frame printer with a moving bed marked 256 × 256 × 256 mm³, a touchscreen on the front, and the AMS lite standing beside it holding four spools of filament that feed the single toolhead through four tubes.
Bambu Lab

At a glance

  • Best forPLA and PETG in four colours, on a desk, for the least money
  • Pricing$399.00
  • Key differentiatorBambu’s four-spool system at $399.00, on an open frame

Quick take

The cheapest way into Bambu’s four-spool system, and the one with a consequence attached. The A1 moves the bed rather than enclosing the print, and Bambu’s own specification lists ABS, ASA, PC, PA, PET and every fibre-reinforced polymer as Not Recommended — while listing PLA, PETG, TPU and PVA as ideal. Same 256 mm cube, same 300 °C nozzle, a 1080p camera, and runout, tangle and odometry sensors. $399.00 with the AMS lite.

Good fit if

  • You print PLA, PETG, TPU or PVA: Bambu lists all four as ideal
  • You want the lowest price into Bambu’s AMS system: $399.00 with the AMS lite
  • You want the sensor set: runout, tangle and filament odometry are all listed

Consider another option if

  • You want ABS or ASA: Bambu lists them as Not Recommended for this model
  • You want the print enclosed: this is an open frame
  • You want a tool change instead of a purge: this machine has one nozzle

Key facts

  • Price$399.00
  • Multi-colour architectureSingle nozzle — four spools are fed into one hotend in turn, so the machine purges the old colour at every change
  • Independent toolheads1
  • Build volume256 × 256 × 256 mm
  • Multi-colour systemAMS lite, 4 spools, mounted externally
  • Spools held4
  • EnclosureNo — open frame with a moving bed
  • Max nozzle temperature300 °C
  • Max bed temperature100 °C
  • Nozzle diameter0.4 mm included; 0.2, 0.6 and 0.8 mm available
  • Materials listed idealPLA, PETG, TPU, PVA
  • Materials the maker advises againstABS, ASA, PC, PA, PET and carbon- or glass-fibre reinforced polymers
  • Max toolhead speed500 mm/s (Bambu’s stated max speed of the tool head, not a throughput figure)
  • Max toolhead acceleration10,000 mm/s²
  • Motion systemMoving bed (bed-slinger)
  • CameraChamber camera up to 1080p, timelapse supported
  • Filament runout detectionYes, with filament tangle detection and filament odometry
  • Dimensions465 × 410 × 430 mm
  • Weight8.3 kg printer; 13.5 kg gross with the AMS lite
  • Warranty2 years

Compare Bambu Lab A1 Combo

Alternatives