3D Printers

Snapmaker U1

Four independent toolheads, each holding its own material, swapped mechanically — so nothing is purged between colours. 270 mm cube.

Affiliate disclosure: we may earn a commission from eligible partner links. Read our affiliate disclosure

The Snapmaker U1: a white cube printer with four independent toolheads visible in a bay across the top, four filament paths running into them, four spools mounted on the sides, and a build plate marked BUILD VOLUME 270 x 270 x 270 mm.
Snapmaker

At a glance

  • Best forMulti-material prints where purge waste is the thing you mind most
  • Pricing$749.00
  • Key differentiatorFour independent toolheads and a 270 mm cube, for $749.00

Quick take

A toolchanger at a filament-switcher’s price. Four toolheads with their own 0.4 mm stainless hotends, plus a spare, each keeping its colour or material loaded, so a colour change is a tool change rather than a purge. The largest bed here at 270 × 270 × 270 mm, a 2 MP chamber camera and mesh bed levelling. Snapmaker lists PLA, PETG, TPU, PVA and PCTG, and publishes nothing about a heated chamber. $749.00 — the same as the Bambu P2S Combo. 1-year warranty.

Good fit if

  • You want the biggest bed here: Snapmaker states 270 × 270 × 270 mm
  • You want the higher stated toolhead speed: Snapmaker states 500 mm/s
  • You want a chamber camera as standard: it is a 2-megapixel built-in camera

Consider another option if

  • You want ABS or ASA: Snapmaker lists PLA, PETG, TPU, PVA and PCTG
  • You want a published heated-chamber figure: Snapmaker does not state one
  • You want more than a 1-year warranty

Key facts

  • Price$749.00
  • Multi-colour architectureFour independent toolheads — each colour or material stays loaded in its own head and the machine swaps the head, so nothing is purged between them
  • Independent toolheads4, plus one spare hotend supplied
  • Build volume270 × 270 × 270 mm
  • Multi-colour systemFour independent toolheads with a 5-second toolchanger
  • Spools held4
  • Max nozzle temperature300 °C
  • Max bed temperature100 °C
  • Nozzle diameter0.4 mm proprietary stainless hotends
  • Materials listed idealPLA, PETG, TPU, PVA, PCTG
  • Max toolhead speed500 mm/s (Snapmaker’s stated maximum, not a throughput figure)
  • Max toolhead acceleration20,000 mm/s²
  • Bed levellingMesh bed levelling
  • Camera2-megapixel built-in chamber camera
  • Filament runout detectionSupported
  • ConnectivityWi-Fi 2.4 GHz (IEEE 802.11 b/g/n) and USB flash drive
  • Dimensions584 × 499 × 730 mm
  • Weight18.2 kg
  • Warranty1 year

Compare Snapmaker U1

Alternatives