3D Printers
FLASHFORGE Creator 5 Pro
Four independent toolheads inside an enclosed frame with a 65 °C heated chamber, a 320 °C nozzle and a 120 °C bed.
Affiliate disclosure: we may earn a commission from eligible partner links. Read our affiliate disclosure

At a glance
- Best forEngineering and fibre-filled materials that need a warm, filtered chamber
- Pricing$949.00
- Key differentiatorA 65 °C heated chamber and four toolheads in one machine
Quick take
The only printer in this group with an actively heated chamber — FLASHFORGE publishes 65 °C — and the hottest nozzle and bed here at 320 °C and 120 °C. Four independent toolheads, so nothing is purged between materials, inside an enclosed frame with HEPA13 and activated carbon filtration. The materials list runs from PLA to PPS-CF. Note FLASHFORGE’s own page prints two different speeds: 300 mm/s in the specification table and 600 mm/s in the copy above it. $949.00 list.
Good fit if
- You need a heated chamber: FLASHFORGE publishes an active chamber to 65 °C
- You print engineering materials: the list runs to PA-CF, PET-CF, PPA-CF and PPS-CF
- You want filtration included: HEPA13 plus activated carbon
Consider another option if
- You want the larger bed: this is a 256 mm cube
- You are working to $749.00
- You want one published speed figure: this page prints 300 mm/s and 600 mm/s
Key facts
- Price$949.00
- Multi-colour architectureFour independent toolheads — each colour or material stays loaded in its own head and the machine swaps the head, so nothing is purged between them
- Independent toolheads4
- Build volume256 × 256 × 256 mm
- Multi-colour systemFour independent toolheads
- Spools held4
- EnclosureYes — enclosed frame design
- Heated chamberYes — actively heated to a maximum of 65 °C
- Max nozzle temperature320 °C
- Max bed temperature120 °C
- Nozzle diameter0.4 mm standard; 0.25, 0.6 and 0.8 mm available
- Materials listed idealPLA, PETG, TPU-90A, TPU-95A, TPU-64D, PLA-CF, PETG-CF, SILK, PVA, BVOH, S-Multi, S-PAHT, ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF, HIPS
- Max toolhead speed300 mm/s in FLASHFORGE’s specification table. The marketing copy on the same page states 600 mm/s; the table figure is the one stored.
- Max toolhead acceleration30,000 mm/s²
- Motion systemCoreXY
- Bed levellingAutomatic
- CameraBuilt-in camera, 1280 × 720 at 30 fps
- Air filtrationHEPA13 filter plus activated carbon
- ConnectivityUSB and Wi-Fi
- Dimensions520 × 443 × 710 mm including filament tubes and holders; 441 × 411 × 460 mm without
- Weight18 kg net; 22 kg gross
Compare FLASHFORGE Creator 5 Pro
Alternatives
Bambu Lab A1 Combo
The open-frame A1 with the AMS lite: four spools into one nozzle on a moving bed. Bambu lists ABS, ASA, PC and PA as not recommended.
View productBambu Lab P1S Combo
The enclosed CoreXY P1S with the original AMS: four spools fed into one nozzle, ABS and ASA listed as ideal, 256 mm cube.
View productBambu Lab P2S Combo
The P2S with the AMS 2 Pro, which dries filament as well as feeding it. Enclosed, 110 °C bed, hardened steel nozzle, 256 mm cube.
View product