3D Printers
What kind of 3d printer are you looking for?
All six of these print in four colours, and every maker calls that the same thing. Two very different machines are hiding behind the phrase. A filament switcher has one nozzle and feeds four spools into it in turn, so it purges the old colour out at every change. A toolchanger has four nozzles and swaps the whole head, so there is nothing to purge. They cost the same. After that the decisions are whether the enclosure is included — which is what decides the materials the maker will list — how big the bed is, and how hot the nozzle and bed will go. Speed claims are quoted as each maker labels them, and never turned into a throughput figure. Every figure comes from the manufacturer's own documentation — how we evaluate products.
Filament switchers
The cheaper way to four colours, on machines that are otherwise ordinary ↔ purged material and time on every colour change.

Bambu Lab A1 Combo
3D Printers
The open-frame A1 with the AMS lite: four spools into one nozzle on a moving bed. Bambu lists ABS, ASA, PC and PA as not recommended.
View product
Bambu Lab P1S Combo
3D Printers
The enclosed CoreXY P1S with the original AMS: four spools fed into one nozzle, ABS and ASA listed as ideal, 256 mm cube.
View product
Bambu Lab P2S Combo
3D Printers
The P2S with the AMS 2 Pro, which dries filament as well as feeding it. Enclosed, 110 °C bed, hardened steel nozzle, 256 mm cube.
View product
ELEGOO Centauri 2 Combo
3D Printers
CoreXY with the CANVAS four-colour system: one nozzle, four spools, a 350 °C hotend and a 110 °C bed. Enclosure and camera are add-ons.
View productBambu Lab P1S Combo vs Bambu Lab P2S ComboThe same printer and the same four spools, with a spool unit that can dry filament.
Toolchangers
No purge between materials, and four hotends that can hold four different ones ↔ four hotends to maintain, and a newer idea with less history behind it.

FLASHFORGE Creator 5 Pro
3D Printers
Four independent toolheads inside an enclosed frame with a 65 °C heated chamber, a 320 °C nozzle and a 120 °C bed.
View product
Snapmaker U1
3D Printers
Four independent toolheads, each holding its own material, swapped mechanically — so nothing is purged between colours. 270 mm cube.
View productSnapmaker U1 vs FLASHFORGE Creator 5 ProBoth swap four toolheads; only one publishes a heated chamber and the materials that need it.