Skip to content
Good Picks guideGood Picks Guide
ProductsComparisonsBest PicksAbout

Products

Every product we track, with the details that drive a decision.

All 58Wearables 10Phones 16Espresso Machines 7Robot Vacuums 7Frozen Drink & Dessert Makers 6Electric Fireplaces 63D Printers 6
All typesFilament switchers 4Toolchangers 2
The Bambu Lab A1 Combo: an open-frame printer with a moving bed marked 256 × 256 × 256 mm³, a touchscreen on the front, and the AMS lite standing beside it holding four spools of filament that feed the single toolhead through four tubes.
B

Bambu Lab A1 Combo

3D Printers

The open-frame A1 with the AMS lite: four spools into one nozzle on a moving bed. Bambu lists ABS, ASA, PC and PA as not recommended.

View product
The Bambu Lab P1S Combo: an enclosed black cube printer with a single toolhead inside, the original Bambu Lab AMS sitting on top holding four spools of filament, and a build plate marked 256 × 256 × 256 mm³.
B

Bambu Lab P1S Combo

3D Printers

The enclosed CoreXY P1S with the original AMS: four spools fed into one nozzle, ABS and ASA listed as ideal, 256 mm cube.

View product
The Bambu Lab P2S Combo: an enclosed grey cube printer with a touchscreen, the AMS 2 Pro labelled on top holding four spools of filament, and a build plate marked 256 × 256 × 256 mm.
B

Bambu Lab P2S Combo

3D Printers

The P2S with the AMS 2 Pro, which dries filament as well as feeding it. Enclosed, 110 °C bed, hardened steel nozzle, 256 mm cube.

View product
The ELEGOO Centauri 2 Combo: an open-frame CoreXY printer with ELEGOO on the side and a touchscreen at the front, with the CANVAS unit mounted above four spools of filament that feed its single toolhead.
E

ELEGOO Centauri 2 Combo

3D Printers

CoreXY with the CANVAS four-colour system: one nozzle, four spools, a 350 °C hotend and a 110 °C bed. Enclosure and camera are add-ons.

View product
The FLASHFORGE Creator 5 Pro: a fully enclosed printer labelled Creator 5 Pro with a transparent upper chamber, four filament tubes running to the toolhead bay, four spools on external holders, and a build plate marked 256 × 256 × 256 mm³.
F

FLASHFORGE Creator 5 Pro

3D Printers

Four independent toolheads inside an enclosed frame with a 65 °C heated chamber, a 320 °C nozzle and a 120 °C bed.

View product
The Snapmaker U1: a white cube printer with four independent toolheads visible in a bay across the top, four filament paths running into them, four spools mounted on the sides, and a build plate marked BUILD VOLUME 270 x 270 x 270 mm.
S

Snapmaker U1

3D Printers

Four independent toolheads, each holding its own material, swapped mechanically — so nothing is purged between colours. 270 mm cube.

View product
Good Picks guideGood Picks Guide

Your guide to better choices.

Explore

  • Home
  • Products
  • Comparisons
  • Best Picks

Company

  • About
  • How we evaluate
  • Contact

Legal

  • Affiliate disclosure
  • Privacy
  • Terms

© 2026 Good Picks Guide